Polymaker PolyTerra PLA+ 1.75mm Filament 1KG

$35.95 AUD

CURRENTLY IN STOCK

Color: Satin Black

  • Satin Black
  • Satin Blue
  • Satin Green
  • Satin Grey
  • Satin Red
  • Satin White
Out of stock

Bulk Discount across all our filament

Qty Discount Coupon Code
Buy 5 8% Off BULKFILAMENT5
Buy 10 11% Off BULKFILAMENT10
Buy 20 13% Off BULKFILAMENT20
Buy 30 15% Off BULKFILAMENT30
Order in H, M, Seconds (before 1pm AEST) for same day despatch
Add to Wishlist
SKU: 24227N/A W/H: V-05-D-P4 N/A Barcode: 6938936709459 N/A Shipping Weight: 1300g N/A Categories: 3D Printer Filaments , 3D Printer Parts , PLA Filaments , Polymaker , Tags: 1.75mm, 3D Printing, Filament Roll, PLA, Polymaker

We accept the following payment methods

Are you looking to buy Polymaker PolyTerra PLA+ 3D Printer Filament in Australia?

PolyTerraTM PLA+ is a strength enhanced variant of Polymakers eco-friendly and
sustainable PolyTerraTM PLA formulation; combining sustainability with good mechanical
properties. While the original PolyTerraTM PLA was engineered to offer a matte surface finish
and easy-support removal, PolyTerraTM PLA+ features a semi-gloss surface finish and is
optimized to deliver better strength & layer adhesion than PolyTerraTM PLA. It is a
sustainable product sourced naturally and for every spool produced a tree is planted to give
back to the earth.

Features

  • Strength Optimized Formula - PolyTerraTM PLA+ is based on the same eco-friendly
    formula as PolyTerraTM PLA but has been optimized for strength and inter-layer adhesion.
  • Improved Ductility - Like PolyTerraTM PLA, PolyTerraTM PLA+ delivers improved ductility
    which is less brittle (Charpy Impact) in X-Y axis than standard PLA formulations.
  • Glossy Surface - This newly developed formulation renders parts with an attractive slight
    gloss surface finish which offers a nice effect for aesthetic models.
  • Bioplastic PLA Formula - PolyTerraTM PLA+ is a newly developed material from
    Polymaker called FBC (Fully Bio Compound). It is a compound of PLA bioplastic and
    naturally occurring biocomposite. PLA is biodegradable under industrial composting
    conditions however the degradation rate is very slow in ambient temperatures.
  • Polymakers FBC formula contains less PLA plastic to degrade making PolyTerraTM PLA+
    a more environmental friendly material. PolyTerraTM PLA+ is a strength optimized version
    of the FBC formulation featuring a different ratio of PLA and bio-organic compounds as
    PolyTerraTM PLA.
  • Eco-sustainable Packaging & Carbon Offset – Polymaker are committed to helping
    combat plastic waste, as such PolyTerraTM PLA+ comes on a fully recycled cardboard
    spool with recycled labels and box. Furthermore, Polymaker will plant one tree in
    Australia through the ONETREEPLANTED association for every locally sold spool of
    PolyTerraTM PLA+.
  • Compatibility / Jam-FreeTM- PolyTerraTM PLA+ is compatible with a wide range of 3D
    printers and is manufactured with Polymakers Jam-FreeTM technology which leads to
    excellent printing quality with zero risk of nozzle jams caused by heat creep [1].
  • PolyTerraTM PLA+ works well on most printing surface with a thin layer of glue stick
    applied, no heated bed is required but can sometimes be used at 40 - 50°C for better
    results (maximum 60°C).
  • Uncompromised Quality - PolyTerraTM PLA+ filament is made with the highest quality
    ingredients including Ingeo® from Natureworks; a high quality PLA material produced
    from rapidly renewable plant resources in the US. Combining Polymakers innovative R&D
    technologies, compounding and extrusion systems with Natureworks Ingeo® resins
    produces a reliable 3D printing filament to print beautiful and accurate models.

Heat creep is the the process of heat spreading irregularly throughout the hot end, one common example is with all metal hot end
designs. Once heat creeps towards the cold end, the PLA filament softens prematurely in the cold end and expands resulting in a jam.
Polymakers Jam-FreeTM technology increases the heat resistance of the filament itself (not the printed part) to 100 ̊C which prevents the
filament from prematurely softening in the cold end and can still melt rapidly once entering the heating zone.

Specifications:

Print Settings Mechanical
Properties (X-Y)

Thermal Properties Other

Nozzle
Temperature:
190 ̊C – 230 ̊C
Printing Speed:
30mm/s – 70mm/s
Bed Temperature:
25 ̊C – 60 ̊C
(You may find lower
bed temperatures (i.e
45 ̊C work better due
to lower crystallinity
and stress)
Bed Surface:
Glass with glue,
Blue Tape,
BuildTak®
Cooling Fan:
ON
Note: Printing
conditions may vary
with different
printers and nozzle
diameters.

Young’s Modulus:
1951 ± 51 Mpa
Tensile Strength:
27.0 ± 0.5 Mpa
Bending Strength:
49.5 ± 1.8 Mpa
Impact Strength:
5.76 ± 0.85 kJ/m2

Glass Transition
Temperature:
59 ̊C
Heat Deflection
Temperature
(0.45 MPa):
58.4 ̊C
Heat Deflection
Temperature
(1.8 MPa):
56.2 ̊C
Vicat Softening
Temperature:
62 ̊C

Density:
1.24 g/cm3
Recommended
Support Materials:
PolyDissolveTM S1,
PolySupportTM
Product Manual:
Contact Us
Technical Data
Sheets:
Contact us
Safety Data Sheets:
Contact us

Disclaimer: The typical values presented in Polymakers data sheet are intended for
reference and comparison purposes only. Due to the nature of 3D printing they should not
be used for design specifications or quality control purposes.
Storage: It is recommended to store PolyTerraTM PLA+ in the PolyBoxTM to prevent
moisture absorption which will lower the quality and the mechanical properties of the print. If
the filament has absorbed moisture it can be dried at 55 ̊C for 6 hours in a convection oven.

Browse more

Why Choose Phaser FPV?

Here’s Why 1000s of Buyers Trust Us

In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

Same-Day Ship

If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.


Transparent Stock

We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

Highly Rated

We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

Walk In Anytime

Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

Fast Support

We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

We’re on Social

We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Polymaker PolyTerra PLA+ 1.75mm Filament 1KG

Satin Black
Satin Black
$35.95