Are you looking to buy the Aikon AK32PIN 20x20 4-in-1 35A ESC V2 With Heatsink in Australia?
Aikon has found a way to make their larger ESC and fit it into a 20x20 form factor! With the latest BLHeli32 firmware, current sensor, ESC telemetry, and more, the AK32PIN is an advanced 20x20mm 4-in-1 ESC. To view the version without a heatsink see the AK32PIN 4in1 20x20 with no heatsink here.
This ESC is over 5g lighter than its 30.5x30.5 relative and is still just as capable. Able to handle 6S up to 35A per channel, this ESC has more than enough juice to power most quads.
This ESC is strongly recommended by the guys at Heli Nation. In fact, they've created a dedicated F7 flight controller that pairs directly with this ESC. Given that it is rated 6S with 45A burst current, this ESC can really take a beating. Pair this with the Heli Nation Talon F7 FC and you have your self the best 20x20 flight stack on the market. It also works with the Aikon F4 Mini OSD 20x20 Flight controller.
Features
- BLHeli_32 code base
- Programmable PWM frequency of up to 48KHz
- Auto-timing for higher efficiency and reliability
- Analog Voltage/Current sensing
- Adjustable “Brake on Stop” force
- Improve direction change in Bidirectional mode
- One current sensor to measure the total amp draw and telemetry functions.
- ESC Telemetry (Voltage and RPMs and current)
- Configuring from FC using DShot commands
- Programmable sine modulation mode
- Programmable soft bidirectional mode
- Programmable autonomous periodic (every 32ms) telemetry mode
- Hardware noise filter on the signal input
Specifications
Battery |
2-6s |
Constant Current |
35A |
Burst Current |
45A |
Mount Hole |
20*20mm |
Firmware |
BLHeli32 |
MCU |
STM32PINF0 |
Bootloader |
Yes |
Weight( with/wire) |
10g |
Signal wire length |
100mm |
Battery wire length |
100mm |
Includes
- 1x AK32PIN ESC
- 1x XT30 Pigtail
- 5x Mounting Gummies
- 1x 8pin Harness
- 1x 25v 330uf Capacitor