Are you looking to buy Bambu Lab TPU 95A HF Filament 1.75mm 1kg in Australia?
Bambu TPU 95A HF is an optimised TPU filament designed for high-speed 3D printing. Compared to regular TPU 95A, TPU 95A HF offers an impressive 3x faster printing speed, effectively addressing the common problem of lengthy prints associated with other TPU filaments. TPU 95A HF maintains exceptional interlayer adhesion, impact resistance, flexibility, and cold-temperature resilience, just like traditional TPU filaments. Experience faster TPU printing without any compromises!
High Speed Printing
Elevate your TPU printing efficiency to the next level with Bambu TPU 95A HF, featuring a print speed that's 3 times faster than standard TPU 95A.
Bambu TPU 95A | Bambu TPU 95A HF | |
Nozzle Temperature / °C | 230 | 230 |
Max Volumetric Speed / (mm³/s) | 3.6 | 12 |
Printing Speed / (mm/s) | 44 | 147 |
Model Specimens | Diameter: 50 mm Height: 100 mm Infill:40% |
Soft and Flexible
Bambu TPU HF is an exceptionally soft and flexible filament with extraordinary impact resistance, enabling you to print parts that need withstand impact, collision, and falling.
Widely Used Application
Accessory Compatibility
Recommended | Not Recommended | |
Build Plate | Cool Plate, Engineering Plate, High Temperature Plate or Textured PEI Plate | / |
Hotend | Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm) Stainless Steel Nozzle (0.4 mm) |
Stainless Steel Nozzle (0.2 mm) |
Glue | Bambu Liquid Glue Glue Stick |
/ |
Recommended Printing Settings
- Drying Settings (Blast Drying Oven): 70 °C,8 h
- Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
- Nozzle Temperature: 220 - 240 °C
- Bed Temperature (with glue): 30 - 35 °C
- Printing Speed: < 200 mm/s
Physical Properties
- Density: 1.22 g/cm³
- Vicat Softening Temperature: N / A
- Heat Deflection Temperature: N / A
- Melting Temperature: 183 °C
- Melt Index: 36.5 ± 2.6 g/10 min
Mechanical Properties
- Tensile Strength: 27.3 ± 0.8 MPa
- Breaking Elongation Rate: > 650%
- Bending Modulus: N / A
- Bending Strength : N / A
- Impact Strength : N / A
Printing Tips
- Drying conditions: 70℃ for 8 hrs. TPU 95A HF is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to: Filament drying instructions on WIKI.
- To obtain higher printing quality, please check TPU Printing Guide before printing.
Included
- 1x Filament & Desiccant
- Instructions & Spool sticker
- 1x Filament Label
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
Browse more
- Browse all Bambu Lab Filament
- Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
- Browse all Bambu AMS Spare Parts & Accessories
- Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
- Browse all Bambu Labs
- Browse all Printer Spare Parts
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse Speciality Filament
- Browse TPU Filament
- Check out all our 3D Printing Supplies