Are you looking to buy Bambu Lab ABS Filament 1.75mm 1kg in Australia?
Looking for Bambu Lab ABS in Australia?
Bambu Labs ABS comes with NO SPOOL. You will need to twist your other Bambu Labs spool and pull it apart and place this one in. Also place your RFID tag on the spool so that your Bambu Labs AMS system can auto detect it. Please see diagrams below for more info.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
- Drying Settings before Printing - 80 °C，8 h
- Printing and Keeping Container's Humidity - < 20% RH (Sealed，with Desiccant)
- Nozzle Temperature - 240 - 270 °C
- Bed Temperature (with PVP Glue) - 80 - 100 °C
- Printing Speed - < 300 mm/s
Physical Properties
- Density - 1.05 g/cm³
- Vicar Softening Temperature - 94 °C
- Heat Deflection Temperature - 87 °C
- Melting Temperature - 200 °C
- Melt Index - 34.2 ± 3.8 g/10 min
Mechanical Properties
- Tensile Strength - 41 ± 1 MPa
- Breaking Elongation Rate - 41 ± 1 MPa
- Bending Modulus - 1880 ± 110 MPa
- Bending Strength - 68 ± 3 MPa
- Impact Strength - 39 ± 3.6 kJ/m²
Printing Tips
Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
Included
- 1x Filament & desiccant
- Instructions & Spool Sticker
- Filament Label
Bambu Labs ABS Colour List:
- Bambu Lab ABS Black
- Bambu Lab ABS White
- Bambu Lab ABS Blue
- Bambu Lab ABS Red
- Bambu Lab ABS Yellow
Browse more
- Browse all Bambu Lab Filament
- Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
- Browse all Bambu AMS Spare Parts & Accessories
- Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
- Browse all Bambu Labs
- Browse all Printer Spare Parts
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse Speciality Filament
- Browse TPU Filament
- Check out all our 3D Printing Supplies