Bambu Lab PETG-CF Basic Filament

$58.95 AUD

left in stock

Colour: Violet Purple

  • Violet Purple
  • Black
  • Malachite Green
  • Indigo Blue
  • Brick Red
  • Titan Grey
Out of stock

Bulk Discount across all our Filament Rolls

Qty Discount Coupon Code
Buy 5 8% Off BULKFILAMENT5
Buy 10 11% Off BULKFILAMENT10
Buy 20 13% Off BULKFILAMENT20
Buy 30 15% Off BULKFILAMENT30
Order in H, M, Seconds (before 1pm AEST) for same day despatch
Add to Wishlist
SKU: 30436N/A W/H: S-02-E N/A Barcode: N/A Shipping Weight: 1400g N/A Categories: 3D Printer Filaments , Bambu Lab , Bambu Lab Filament (PLA/PETG/ABS/PC/TPU) , Carbon Fibre Filament , PETG Filaments , Tags: Bambu Lab, Carbon Fibre Filament, Filament Roll, PETG

We accept the following payment methods
       

Are you looking to buy Bambu Lab PETG-CF Basic Filament in Australia?

Looking for Bambu Lab PETG-CF Basic Filament in Australia?

Bambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing nozzle clogging and clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.

Less clumping and stringing

Bambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.

petg-cf

Premium print surface

Carbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.

petg-cf

Carbon Fibre Texture

Carbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.

petg-cf

Shiny Finish

Different from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.

petg cf

Strong XY Performance

The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.

Parameters Comparison

PLA-CF PETG-CF
Filament Type Carbon Fiber Infill Carbon Fiber Infill
Hotend Compatibility Hardened Steel (0.4, 0.6, 0.8 mm) Hardened Steel (0.4, 0.6, 0.8 mm)
Build Plate Compatibility Cool Plate, High Temperature Plate, Textuerd PEI Plate Engineering Plate, High Temperature Plate, Textuerd PEI Plate
AMS Compatibility Yes Yes
Surface Matte Shiny
Print Speed <250 mm/s <200 mm/s
Toughness (Impact Strength - XY) 23.2 kJ/m² 41.2 kJ/m²
Strength (Bending Strength - XY) 96 MPa 83 MPa
Stiffness (Bending Modulus - XY) 3700 MPa 2890 MPa
Layer Adhesion (Impact Strength - Z) 7.8 kJ/m² 10.7 kJ/m²
Heat Resistant(HDT, 0.45 MPa) 55 °C 74 °C

High Flexibility

Compared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness

and is less prone to fracture under external stress and impact.

图片加载失败文案

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid

Recommended Printing Settings

  • Drying Settings before Printing - 65 °C,8 h
  • Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
  • Nozzle Temperature - 240 - 270 °C
  • Bed Tempreature (with PVP Glue) - 65 - 75 °C
  • Printing Speed - < 200 mm/s

Physicial Properties

  • Density - 1.25 g/cm³
  • Vicar Softening Temperature - 85 °C
  • Heat Deflection Temperature - 74 °C
  • Melting Temperature - 225 °C
  • Melt Index - 19.3 ± 2.4 g/10 min

Mechanical Properties

  • Tensile Strength - 59 ± 4 MPa
  • Breaking Elongation Rate - 10.4 ± 0.6 %
  • Bending Modulus - 2890 ± 130 MPa
  • Bending Strength - 83 ± 4 MPa
  • Impact Strength - 41.2 ± 2.6 kJ/m²

Printing Tips

  • Bambu PETG-CF needs proper drying before printing. Recommended drying condition is 65 ℃ for 8 hours in a filament dryer, and 75 ℃ for 10 hours on a printer‘s heatbed. Learn more about filament drying. Please refer to: Filament drying cover on WIKI.
  • To get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.

     

  • To get shinier looks, set lower speeds and relatively higher temperatures.

Included

  • 1x Filament & Desiccant
  • 1x Filament Label

Browse more

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Bambu Lab PETG-CF Basic Filament

Violet Purple
Violet Purple
$58.95