Are you looking to buy Bambu Lab PETG-CF Basic Filament in Australia?
Looking for Bambu Lab PETG-CF Basic Filament in Australia?
Bambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing nozzle clogging and clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.
Less clumping and stringing
Bambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.
Premium print surface
Carbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.
Carbon Fibre Texture
Carbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.
Strong XY Performance
The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.
Parameters Comparison
PLA-CF | PETG-CF | |
Filament Type | Carbon Fiber Infill | Carbon Fiber Infill |
Hotend Compatibility | Hardened Steel (0.4, 0.6, 0.8 mm) | Hardened Steel (0.4, 0.6, 0.8 mm) |
Build Plate Compatibility | Cool Plate, High Temperature Plate, Textuerd PEI Plate | Engineering Plate, High Temperature Plate, Textuerd PEI Plate |
AMS Compatibility | Yes | Yes |
Surface | Matte | Shiny |
Print Speed | <250 mm/s | <200 mm/s |
Toughness (Impact Strength - XY) | 23.2 kJ/m² | 41.2 kJ/m² |
Strength (Bending Strength - XY) | 96 MPa | 83 MPa |
Stiffness (Bending Modulus - XY) | 3700 MPa | 2890 MPa |
Layer Adhesion (Impact Strength - Z) | 7.8 kJ/m² | 10.7 kJ/m² |
Heat Resistant(HDT, 0.45 MPa) | 55 °C | 74 °C |
High Flexibility
Compared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness
and is less prone to fracture under external stress and impact.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
- Drying Settings before Printing - 65 °C,8 h
- Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
- Nozzle Temperature - 240 - 270 °C
- Bed Tempreature (with PVP Glue) - 65 - 75 °C
- Printing Speed - < 200 mm/s
Physicial Properties
- Density - 1.25 g/cm³
- Vicar Softening Temperature - 85 °C
- Heat Deflection Temperature - 74 °C
- Melting Temperature - 225 °C
- Melt Index - 19.3 ± 2.4 g/10 min
Mechanical Properties
- Tensile Strength - 59 ± 4 MPa
- Breaking Elongation Rate - 10.4 ± 0.6 %
- Bending Modulus - 2890 ± 130 MPa
- Bending Strength - 83 ± 4 MPa
- Impact Strength - 41.2 ± 2.6 kJ/m²
Printing Tips
- Bambu PETG-CF needs proper drying before printing. Recommended drying condition is 65 ℃ for 8 hours in a filament dryer, and 75 ℃ for 10 hours on a printer‘s heatbed. Learn more about filament drying. Please refer to: Filament drying cover on WIKI.
- To get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.
-
To get shinier looks, set lower speeds and relatively higher temperatures.
Included
- 1x Filament & Desiccant
- 1x Filament Label
Browse more
- Browse all Bambu Lab Filament
- Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
- Browse all Bambu AMS Spare Parts & Accessories
- Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
- Browse all Bambu Labs
- Browse all Printer Spare Parts
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse Speciality Filament
- Browse TPU Filament
- Check out all our 3D Printing Supplies