Are you looking to buy a FETtec FC G4 v1.7 Flight Controller in Australia?
Characteristics:
-
Latest STM32G473 processor
- 180Mhz + Math accelerator
- Gyro IIM-42652 SPI
-
Designed for 6-27V supply voltage (2S-6S Lipo)
-
2x onboard BEC (2A each)
- 5V BEC for RX
- 5V/16V BEC for VTX (configurable and real Pit*)
-
Improved IO protection
-
All IOs of the microcontroller, eg in connectors or solder pads, are protected against voltage or current peaks
-
2x 8 pin connector for solderless ESC connection
- Connector 1: ESC signal 1-4, telemetry, VCC, GND
- Connector 2: ESC signal 5-8 (depending on the selected UAV type 1-4), telemetry, VCC, GND
-
1x 8 pin connector for solderless connection to VTX, camera and OSD of the digital systems
-
real Pit* VCC, GND, video in, video out, BEC 5V/16V, VCS/TX3, RX3
-
-
2x 6 pin connector for serials
- RX1, TX1, 3.3V, VCC, 5V, GND
- RX3, VCS/TX3, RGB LED, VCC, 5V, GND
-
1x 4 pin connector for receiver
-
Signal, TLM, 5V, GND
-
-
5 UART serials
- UART 1 free
- UART 2 occupied by receiver
- UART 3 free
- UART 4 occupied by OSD, can be used elsewhere depending on configuration
- UART 5 occupied by ESCs / TLM / Onewire
-
4 ESC solder pads (Signal/GND) on each corner
-
Buzz pads
-
4 tiny RGB LEDs (color selectable)
-
Supported ESC protocols
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
FETtec Alpha FC firmware (KISS FC firmware flashable)
-
Updated onboard OSD
- Graphic OSD (STM32)
- Full KISS tuning
- Filters (PIDs, Rates, Settings)
- LED settings (RGB LED, Racewire)
- VTX
- Live data graphics (voltage, engine speed, current, engine temperature, gyro values, reception quality)
- KISS GPS support + Live Map
- Custom graphic pilot logo
- Stick Overlay
- Custom layout
-
Connector type: JST-SH-1mm
*real pit mode: switchable supply pad
Dimensions:
-
Maximum external dimensions: 37.2 x 37.2mm, without fastening straps 30 x 30mm
-
Arrangement of the mounting holes:
- 20 x 20mm with M2 mounting holes (upgradable to M3)
- 30 x 30mm with M3 mounting holes
- 30 x 30mm mounting hole tabs are removable to reduce the overall size of the FC
-
Height: 7.9mm
-
Weight: 5.37g
Firmware:
-
FETtec Alpha FC firmware (KISS FC firmware flashable)
-
FETtec OSD firmware
Includes:
- 1x FETtec FC G4 v1.7
- 1x open 8 pin cable (JST connector on one side)
- 1x open 6 pin cable (JST connector on one side)
- 1x open 4 pin cable (JST connector on one side)
Browse more
- Browse all FETtec Flight Controllers
- Browse all KISS Flight Controllers
- Browse all Flight controllers