Are you looking to buy Bambu Lab X2D 3D Printer in Australia?
Bambu Lab X2D. Xcellence made simple.
Features
- Dual-Nozzle 3D Printing
- Faster Multi-Color Printing & Cleaner Support Removal
- 300 °C Nozzle & 65 °C Active Chamber Heating
- Closed-Loop Servo Motor Extruder
- Full Filament Path AI Detection
- 256 × 256 × 260 mm³ Print Volume
- Voltage Range: 100-120 V
- To connect more than two AMS (including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed
Dual Nozzle System.
Stop overthinking with support - start peeling it off clean.
The main nozzle prints the part. The auxiliary nozzle handles the support. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean.
In actual testing, print quality from the auxiliary nozzle is slightly lower than that of the main nozzle.
Add more color, more details and more fun.
Tough and soft. In one print.
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Swap colours instantly.
Dual nozzles swap in a split second. Enjoy faster colour changes, cleaner transitions and far less waste.
Recommended to use official Bambu Lab filaments with the auxiliary nozzle, especially official PLA for model printing. Third-party filaments on the auxiliary nozzle may not deliver optimal print quality.
Finer. Sharper. True to the design.
Tap. Switch. Done. Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap.
A lighter toolhead means less inertia and vibration. Even at full speed, surfaces stay flawless - all the way to the top.
Cool it. Before gravity makes it droop.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilises each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
X2D Cooling
Typical Cooling
Hot Enough Isn't Enough. Heat It Even.
The X2D pairs a 300°C nozzle with a 65°C actively heated chamber - hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn't the point - the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
X2D Heating
Typical Heating
Calibration adapts to wear and material changes.
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn't. Flow Dynamics Calibration builds a time-varying, nonlinear model of your entire extrusion system. So whether there's minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
Flow Dynamics Calibration on X2D applies to the main nozzle only.
PMSM Servo System: Smoother surfaces start inside the extruder.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
PMSM servo motor is equipped on the main extruder only.
Smooth surface quality.
Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print.
Compensation makes corners sharp and details clean.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time - so edges print crisp, no matter how fast.
AI Camera keeps an eye on your prints.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for debris and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time - pausing the job before it wastes hours of time and filament.
Start Check
Spaghetti
Nozzle Clumping
Purge Chute Jam
Fully-equipped sensors cover every critical stage.
31 sensors span the entire system - monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
Filament Path Monitoring ｜ Thermal Control
All the must-haves for everyday use.
Clean air. Always.
X2D runs a three-stage filtration system every time it prints. A G3 pre-filter, an H12 HEPA filter, and a coconut-shell activated carbon layer work together to reduce odours and airborne particles. The same trusted filtration system used in H Series printers. Quiet. Clean. Ready for everyday spaces.
For optimal performance, replace filters according to the recommended maintenance schedule.
Safe for your living room.
The X2D is UL2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic. Confirmed for low particle and VOC emissions - so you can print in your personal space with peace of mind.
Tool-free nozzle swap.
Swap nozzles in seconds. No tools, no hassle. Easy for first time users.
Quiet enough for overnight prints.
Active Motor Noise Cancelling and a noise-optimised air duct keep X2D below 50db under typical conditions. Quiet enough for overnight printing.
Suitable for overnight printing when the printer is placed in a separate room from the sleeping area. Individual noise perception may vary.
See every detail, remotely.
Brighter chamber lighting makes Live View and time-lapse clearer tan ever, so you can check on prints from anywhere.
One million switches. Still smooth.
X2D's dual-nozzle system completed over 1,000,000 switch cycles in life-cycle testing, maintaining smooth and consistent motion throughout. Built for years of dependable use.
A printer that updates like your phone.
X2D prints beautifully the day it arrives. And it gets better with every update. Major firmware updates land roughly every three months - new features, better performance, all pushed straight to your machine.
Based on the average update cadence across Bambu Lab printers. Actual timing may vary.
Specifications
- Printing technology: FDM (fused deposition modeling)
- Build Volume (WxDxH):
- Main Nozzle Printing: 256x256x260 mm³
- Auxiliary Nozzle Printing: 235.5x256x256 mm³
- Dual Nozzle Printing: 235.5x256x256 mm³
- Total Volume for Two Nozzles: 256x256x260 mm³
- Chasis Material: Plastic and Steel
- Outer Frame Material: Plastic, Glass, Metal
- Physical Dimensions: 392x406x478 mm³
- Net Weight: 16.25kg
- Main Extruder Gear: Hardened Steel
- Main Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
- Auxilliary Extruder Gear: Hardened Steel
- Auxilliary Extruder Motor: Stepper Motor
- Nozzle: Hardened Steel
- Max. Nozzle Temperature: 300°C
- Included Nozzle Diameter: 0.4mm
- Supported Nozzle Diameter: 0.2mm, 0.4mm, 0.6mm, 0.8mm
- Filament Cutter: Built-in
- Filament Diameter: 1.75mm
Note:
- For optimal print quality, please use the main hotend to print these filaments.
- The printer’s voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage.
- To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3-5 minutes.
Product Variation Notice
Depending on the production batch, your X2D may or may not include a silicone wiper near the nozzle-switching area. Its function has since been replicated through a software update, so both versions perform identically.
Unboxing Video
Includes
- 1x Bambu Lab X2D 3D printer
- 1x Textured PEI build plate
- 1x External Exhaust Fan Bundle
- 1x Accessory Box
- 1x Spool Holder
Browse more
- Browse all Bambu Lab X Series
- Browse all Bambu Lab A Series
- Browse all Bambu Lab P Series
- Browse all Bambu Lab H Series
- Browse all Bambu Lab Filament
