Are you looking to buy a NewBeeDrone BeeBrain BLV4 AIO F4 FC in Australia?
The BeeBrain BLV4 AIO Flight Controller is an ideal choice for compact builds, catering to the tiniest setups. This single board integrates a flight controller, a 12AMP 4-In-1 BLHeli_S ESC, a 5.8GHz VTX, and an ELRS receiver onto a compact 29x29mm platform. The BLV4 offers exceptional performance and an impressive array of features!
Features
- Built-In ELRS 2.4GHz Receiver
- 25x25 Mounting Pattern
- 5w/25w Switchable VTX
- F411 Flight Controller
- 12A BLHeli_S ESC
- 1-2S Voltage
- BMI270 Gyro
Specifications
- Receiver: ELRS2.4 Diversity receiver(ESP32 compatible with wifi&bluetooth firmware update) 2.4G T-Antenna(Top) & normal 2.4G antenna(bottom)
- VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna
- Battery input: 1-2S (Preset only support 1S, 2S will need throttle cap at less 50%)
- Flight Controller Weight: 6.5g(Include antennas and battery connector)
- ESC: 12A BLHeliS Pre-Flash with Bluejay 0.16 target: S-H-40 48kHz
- OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
- Flight Controller Size: Outer dimensions: 29x29x7.6mm
- Uart2: Tx&Rx for ExpressLRS2.4G Receiver
- Power Connector: NBD-PH2.0 connector
- Flight Controller: BeeBrain BLv4 ELRS
- Flight Controller Holes: 25.5x25.5mm
- ESC Connector: JST-1.0 3Pin
- Uart1: Tx&Rx free
- MCU: STM32F411
Includes
- 1x NewBeeDrone BeeBrain BLV4 ELRS AIO
- 1x Receiver T-Antenna
- 1x Receiver Antenna
- 4x Rubber Grommet
- 1x VTX Antenna
- 4x Screw
Important Notes
- Binding process: Power up the drone 3 times, on the third time you plug in power, and the ELRS Receiver will get into the binding mode.
- This board is only compatible with the NewBeeDrone BeeEye camera or RunCam Nano4 Camera.
Browse more
- Browse all AIO Flight Controllers
- Browse all Newbeedrone
- Browse all Flight controllers