Bambu Lab TPU 95A HF Filament 1.75mm 1kg

$64.95 AUD

IN STOCK ( left )

Colour: Red

  • White
  • Black
  • Red
  • Yellow
  • Grey
  • Blue
Out of stock

Bulk Discount across all our filament

Qty Discount Coupon Code
Buy 5 8% Off BULKFILAMENT5
Buy 10 11% Off BULKFILAMENT10
Buy 20 13% Off BULKFILAMENT20
Buy 30 15% Off BULKFILAMENT30
Order in H, M, Seconds (before 1pm AEST) for same day despatch
Add to Wishlist
SKU: 30442N/A W/H: S-01-C-01 N/A Barcode: N/A Shipping Weight: 1405g N/A Categories: 3D Printer Filaments , Bambu Lab , Bambu Lab Filament (PLA/PETG/ABS/PC/TPU) , TPU Filament Tags: Bambu Lab, Filament Roll, TPU

We accept the following payment methods
       

Are you looking to buy Bambu Lab TPU 95A HF Filament 1.75mm 1kg in Australia?

Bambu TPU 95A HF is an optimised TPU filament designed for high-speed 3D printing. Compared to regular TPU 95A, TPU 95A HF offers an impressive 3x faster printing speed, effectively addressing the common problem of lengthy prints associated with other TPU filaments. TPU 95A HF maintains exceptional interlayer adhesion, impact resistance, flexibility, and cold-temperature resilience, just like traditional TPU filaments. Experience faster TPU printing without any compromises!

pa6-cf filament

High Speed Printing

Elevate your TPU printing efficiency to the next level with Bambu TPU 95A HF, featuring a print speed that's 3 times faster than standard TPU 95A.

tpu hf

Bambu TPU 95A Bambu TPU 95A HF
Nozzle Temperature / °C 230 230
Max Volumetric Speed / (mm³/s) 3.6 12
Printing Speed / (mm/s) 44 147
Model Specimens Diameter: 50 mm Height: 100 mm Infill:40%

Soft and Flexible

Bambu TPU HF is an exceptionally soft and flexible filament with extraordinary impact resistance, enabling you to print parts that need withstand impact, collision, and falling.

asa filamentasa filament

Widely Used Application

tpu filamenttpu filament

Accessory Compatibility

Recommended Not Recommended
Build Plate Cool Plate, Engineering Plate, High Temperature Plate or Textured PEI Plate /
Hotend Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm)
Stainless Steel Nozzle (0.4 mm)
Stainless Steel Nozzle (0.2 mm)
Glue Bambu Liquid Glue
Glue Stick
/

Recommended Printing Settings

  • Drying Settings (Blast Drying Oven): 70 °C,8 h
  • Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
  • Nozzle Temperature: 220 - 240 °C
  • Bed Temperature (with glue): 30 - 35 °C
  • Printing Speed: < 200 mm/s

Physical Properties

  • Density: 1.22 g/cm³
  • Vicat Softening Temperature: N / A
  • Heat Deflection Temperature: N / A
  • Melting Temperature: 183 °C
  • Melt Index: 36.5 ± 2.6 g/10 min

Mechanical Properties

  • Tensile Strength: 27.3 ± 0.8 MPa
  • Breaking Elongation Rate: > 650%
  • Bending Modulus: N / A
  • Bending Strength : N / A
  • Impact Strength : N / A

Printing Tips

  • Drying conditions: 70℃ for 8 hrs. TPU 95A HF is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to: Filament drying instructions on WIKI.
  • To obtain higher printing quality, please check TPU Printing Guide before printing.

Included

  • 1x Filament & Desiccant
  • Instructions & Spool sticker
  • 1x Filament Label

Instructions for Printed Spool

abs filament

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

abs filament

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

abs filament

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

abs filament

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.

Browse more

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Bambu Lab TPU 95A HF Filament 1.75mm 1kg

Red
Red
$64.95