Sold Out

Bambu Lab PLA Glow Filament 1.75mm 1kg

$45.95 AUD

left in stock

Colour: Glow Orange

  • Glow Orange
  • Glow Green
  • Glow Yellow
  • Glow Blue
  • Glow Pink

Bulk Discount across all our Filament Rolls

Qty Discount Coupon Code
Buy 5 8% Off BULKFILAMENT5
Buy 10 11% Off BULKFILAMENT10
Buy 20 13% Off BULKFILAMENT20
Buy 30 15% Off BULKFILAMENT30
Add to Wishlist
SKU: 30470N/A W/H: N/A Barcode: N/A Shipping Weight: 1405g N/A Categories: 3D Printer Filaments , Bambu Lab , Bambu Lab Filament (PLA/PETG/ABS/PC/TPU) , PLA Filaments , Specialty Filaments Tags: Bambu Lab, Filament Roll, PLA, Speciality Filament

We accept the following payment methods
       

Are you looking to buy Bambu Lab PLA Glow Filament 1.75mm 1kg in Australia?

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewellery, and various models that require a captivating glow effect.

pa6-cf filament

Unique Glow in Low Light Conditions

Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.

asa filamentasa filamentasa filament

Accessory Compatibility

Recommended Not Recommended
Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate
Hotend 0.4, 0.6, 0.8 mm Hardened Steel Nozzle* 0.2 mm Nozzle
Glue Bambu Liquid Glue
Glue Stick
/
AMS & AMS lite AMS AMS lite*

* A hardened nozzle is required when printing regularly.

* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.

 

 

 

图片加载失败文案

RFID for Intelligent Printing]

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

图片加载失败文案

Recommended Printing Settings

  • Drying Settings before Printing - 55 °C,8 h
  • Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
  • Nozzle Temperature - 190 - 230 °
  • Bed Tempreature (with PVP Glue) - 35 - 45 °C
  • Printing Speed - < 300 mm/s

Physicial Properties

  • Density - 1.24 g/cm³
  • Vicar Softening Temperature - 57 °C
  • Heat Deflection Temperature - 57 °C
  • Melting Temperature - 160 °C
  • Melt Index - 42.4 ± 3.5 g/10 min

Mechanical Properties

  • Tensile Strength - 39 ± 2 MPa
  • Breaking Elongation Rate - 12.2 ± 0.4 %
  • Bending Modulus - 2750 ± 60 MPa
  • Bending Strength - 76 ± 3 MPa
  • Impact Strength - 26.6 ± 2.8 kJ/m²

Printing Tips

  • For better print results, please reduce the Max Volumetric speed from 21 mm³/s to 15 mm³/s when printing PLA Basic Silver/Gold/Bronze.

图片加载失败文案

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

图片加载失败文案

Instructions for Printed Spool

abs filament

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

abs filament

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

abs filament

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

abs filament

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.

 

Included

  • 1x Filament & Desiccant
  • 1x Instructions & spool sticker
  • 1x Filament Label

Browse more

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page