Are you looking to buy Bambu Lab PLA Pure Filament 1.75mm 1kg in Australia?
Only five ingredients. All food-contact safety certified.
Most food-contact filaments are tested only as a finished spool. Bambu Lab PLA Pure is tested ingredient by ingredient. From base material to pigment—just five ingredients, each one passing EU food-safety certification. A first in the category. Still the only one.
*EU Food-safety certification refers to EU No. 10/2011, the EU's dedicated regulation on plastic materials and articles intended to come into contact with food.
*All ingredients drawn from the EU No. 10/2011 positive list; each traceable to its FCM Substance number.
*Raw materials sourced from leading golbal suppliers, including TotalEnergies-Corbion, Dow, Chemours, BASF - ensuring compliance and traceablility.
*The talc used has been independently tested by a third party and confirmed free of asbestos.
UL GREENGUARD certified. Cleaner air for indoor printing.
PLA Pure is certified to UL GREENGUARD (UL 2904), the recognised standard for 3D printer emissions. The particles and VOCs released measure below the levels of an average kitchen, living room, or office—cleaner than the air you're already breathing.
*UL 2904 is an emissions standard developed by UL Solutions for non-industrial 3D printers, measuring particulate and chemical emissions to assess their impact on indoor air quality.
*3D printing test conditions: Bambu Lab A2L with PLA Pure; 220°C nozzle temperaturel 12mm³/s volumetric flow rate; 150x150x30mm³ test block; 4 hours of continuous printing in an open environment. Air quality was monitored directly in front of the heated bed.
*Passenger vehicle test conditions: Windows opened for 10 minutes prior to testing, followed by a 30-minute equilibration period with windows closed. Air quality was monitored continuously from the rear seat position.
*Scented candle test conditions: Room ventialted for 10 minutes prior to testing. Candle lit under dark conditions, with air quality monitored continously around the candle during burning.
In a 4-hour continuous print test conducted by an accredited international laboratory, PLA Pure produced lower PM2.5 and PM10 emissions than a third-party PLA under identical conditions.*
Test environment: Testing was conducted by an accredited international laboratory in a professional 1m³ sealed environmental chamber. The chamber was pre-conditioned using high-temperature UV aging to ensure baseline air quality readings were non-detectable (ND). Particulate monitoring equipment operated with a detection limit of 0.001mg/m³.
*Test products: Bambu Lab A1 using Bambu PLA Pure and a third-party PLA filament.
*Test procedure: The chamber was stabilised for 30 minutes at 23°C and 50% RH. Printing was performed at a nozzle temperature of 220°C and ran continuously for 4 hours, with air quality sampled at 15-minute intervals.
*Ventilation guidance: While PLA Pure is designed to produce low emissions during printing, adequate ventialtion is recommended to help minimise inhalation exposure.
Toy safety certified. Made for little hands.
Certified under EN 71-3*, the EU safety standard for toy materials, PLA Pure is designed for models that are touched, held, and played with.
A pretend kitchen plate. A toy truck. A treat toy for the cat. PLA Pure is made for little hands and everyday moments at home.
*Safety Notice: 3D-printed doys may pose a choking hazard for young children. Printed parts and support structures can have sharp edges that may cause injury. Printed materials are also flammable. Please choose toy models with care and supervise children during use.
*All models shown were printed in Bambu Lab's testing facility and have passed food-contact and toy-contact safety testing by accredited third-party laboratories. Toy-contact testing follows EN71-3, derived from EU Directive 2009/48/EC on the safety of toys.
Made for everyday objects.
Bambu PLA Pure is tested to EU No. 10/2011, the European Union's core regulation for plastics intended to come into contact with food. That purity is what makes PLA Pure right for the things you use most: kids' toys, household tools, and the small objects that live close to your hands.
*The models shown above were printed in Bambu Lab and have passed food-contact safety testing by accredited third-party institutions.
Proven Strength.
Fewer additives doesn't mean weaker prints. PLA Pure matches Bambu PLA Basic in mechanical performance, with layer adhesion comparable to most PLA on the market.
Purity and strength. No trade-off.
Purer Formula. Effortless Printing.
Fewer additives.* Cleaner composition. PLA Pure doesn't just raise the bar on safety. It prints smoother too. Reduced residue helps minimise nozzle clogs and keeps extrusion consistent, spool after spool.
*To stay fully aligned with EU 10/2011, certain performance additives were intetionally left out. PLA Pure runs at a slightly lower print speed than Bambu PLA Basic as a result.
Even without pre-drying, PLA Pure produces noticeably less stringing than typical third-party PLA. Fewer stray filaments. Cleaner surfaces. Less debris on the things you've made for everyday use.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through Bambu Lab's AMS (Automatic Material system).
Load. Sync. Print. No setup, no guesswork, just reliable results.
Browse more
- Browse all Bambu Lab Filament
- Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
- Browse all Bambu AMS Spare Parts & Accessories
- Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
- Browse all Bambu Labs
- Browse all Printer Spare Parts
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse Speciality Filament
- Browse TPU Filament
- Check out all our 3D Printing Supplies