Are you looking to buy GEPRC Mark4 10 Frame in Australia?
GEP-Mark-10 is a frame designed to manage heavy-load flights. It can carries a maximum payload of 3kg when applied with a 3214 or 3115 900KV motor. The light-weight design structure enables immediate response even when flying with extra weight.
The FC fixing hole size is 30.5×30.5mm(M3), Camera lens fixing hole size is19x19mm(M2), Motor fixing hole size is 19x19mm(M3). Reserving enough space for VTX installation at the end of the frame, and the extended dimension frame can mount up to LiPo 6S 8000mah batteries.
Features
- The extended dimension frame leaves enough space to accommodate the large-capacity battery and increases flight time.
- Equipped with the vertical-shaped reinforce arm to enhance stabilisation and reduce the impact of unsteady on the gyroscope.
- The 3.7mm thickness arm structure ensures the rigidity of the frame.
- Adopting the 30 mm Aluminium standoff leaves sufficient stacking space.
- It supports three types of fixing hole size of VTX : 30.5×30.5mm(M3)、25.5×25.5mm(M2)、20x20mm(M2).
Specifications
- Item: GEP-Mark4-10 Frame
- Dimension: 376mmx303mm
- Motor to motor：428mm
- Top plate: 2mm
- Base plate: 3mm
- Side plate: 2.5mm
- Arm plate: 7mm
- Midplate：3mm
- Arm bar：3mm
- Camera fixing hole size: 19x19mm(M2)
- Motor fixing hole size: 19x19mm（M3）
- FC fixing hole size: 30.5×30.5mm（M3
- VTX fixing hole size: 30.5×30.5mm（M3）/25.5×25.5mm（M2）/20x20mm（M2）
- Weight: 270.0g
Includes
- 1x GEP-Mark4-10 Frame
- 1x M20*300mm battery strap
- 1x Battery Silicone anti-slip Pad
- 4x EVA landing Pads
