Happymodel Crux35 4S HD Freestyle Racing Drone w/ Caddx Nebula Nano
ELRS
$419.95 AUD
Skip to product information
Out of stock
Happymodel Crux35 4S HD Freestyle Racing Drone w/ Caddx Nebula Nano
$419.95 AUD
GST included Shipping calculated at checkout.
Order in
H, M,
Seconds
(before 1pm Sydney time) for same day despatch.
Pickup availability
1/80 Somersby falls RD, Somersby NSW
Unavailable for pickup
Product details
SKU:
28264
Categories:
BNF Quads, DJI Vista Compatible Quads, HappyModel, HD FPV Quads (PNP, BNF, RTF), Quadcopter Parts
Tags:
BNF, DJI Vista Quad
Are you looking to buy a HappyModel Crux35 4S HD Freestyle Racing Drone in Australia?
The Happymodel Crux35 is an ultra-lightweight 3.5" drone by Happymodel is an excellent micro racing drone that comes with the CrazyF411 flight controller, EX1404 brushless motors, and the Caddx Nebula Nano Vista to give you a great flying experience! The HQPROP 3.5-inch three-blade propellers ensure the largest thrust-to-weight ratio.
Receiver options: Integrated SPI ELRS or SPI FrSky D8/D16
Note: SPI FrSky version comes with Betaflight 3.5.7 firmware in order to get a better RSSI range. Bind code is “Frsky_bind” in the CLI Command.
VIDEO: Long Flight time Rippin // Crux35 // Super Agile!!
Features
- Integrated ExpressLRS SPI receiver or Frsky SPI D8/D16 receiver
- Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
- Can be equipped with Naked Gopro or SMO4K
- High efficiency EX1404 power system
- HD video transmission
- Supports 3-4S battery
Specifications
- Receiver option: SPI ExpressLRS 2.4GHz or SPI Frsky D8/D16 (S-FHSS compatible)
- Size: 130mmx130mmx45mm (without propellers)
- Camera option: HD version Nebula Nano +Vista
- Flying time: 9min~15min 4s 750mah battery
- Weight: Crux35 HD 108gram
- Product name: Crux35 HD
- Wheelbase: 150mm
- Brand: Happymodel
CADDX NEBULA NANO VISTA KIT
- Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
- Hardware included:Vista/Nebula nano/Coaxial cable/Antenna
- Dimensions: Vista Kit: 30x29x13mm Camera: 14x14x21mm
- Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
- Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
- Weight: Vista KIT(camera included):24g/Antenna:2.5g
- Power output: 25mW/200mW/500mW/700mW
- Supported Flight Control System: F3,F4,F7
- Min. Latency (end-to-end):720p 60fps: 32ms
- Operating Frequency: 5.725-5.850GHz
- I/O Interface: USB-C,IPEX,3-in-1 Port
- Goggles: work with DJI goggles
- Coaxial Cable:80mm/120mm
- Camera:Sensor: 1/3''CMOS
- FOV: 150°[D],122°[H],93°[V]
- Input Power: 7.4-26.4V
- Shutter: Rolling shutter
- Lens: 2.1mm,f/2.1
- Model: Vista Kit
CrazyF411 FC
- Power supply: 2-4S battery input (DC 8V-17V)
- Built-in Frsky D8/D16 SPI receiverBuilt-in 2.4G Power Amplification
- Built-in voltage detectionFirmware target: MATEKF411RX
- Built-in 20A(each) Blheli_S 4in1 ESC Dshot600 ready
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Built-in Betaflight OSD(SPI Control)
- Board size: 28.5 * 28.5MM
- Built-in Current meter
- Built-in 5V 1.5A BEC
ONBOARD ESC
- Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
- Factory firmware: O_H_5_REV16_8.HEX
- Support BLHeliSuite programmable
- MCU upgraded to EFM8BB21
- Default protocol: DSHOT300
PROPELLERS
- Propeller Diameter: 3.5 inch
- Material : Poly Carbonate
- Hub Diameter : 10mm
- Hub Thickness:4.7mm
- Shaft :1.9/1.5/1.9mm
- Adaptor Rings : NO
- Weight : 1.5g
- Blades : 3
- Pitch : 2
MOTORS
- Motor Dimension(Dia.*Len):Φ15mm*15mm
- Shaft Diameter: Φ1.5mm
- Configu-ration:9N12P
- Stator Diamter:14mm
- KV options: KV3500
- Stator Length:4mm
- Mode: EX1404
- Weight(g):9g
Recommended (Not Included)
- Battery: 4S 750mAh or maximum 4S 1100mAh
Includes
- 1X Happymodel Crux35 4S HD Freestyle Racing Drone w/ Caddx Nebula Nano ( ELRS or FrSky Options)
Browse more
- Browse all HappyModel
- Browse all BNF
- Browse all ELRS