Are you looking to buy Phaetus DropEffect neXtG Fiber Extreme Gradient Hotend PT1000 320 Degrees degrees in Australia?
Ultra High Flow Rate (UHF)
To achieve higher flow rates, the neXtG Hotend was developed with a new heating element and hotend design.
With the ultra-high-flow groove adapter, the melting zone can be expanded even further to achieve a maximum flow rate of up to 45 mm³/s.
Rigid kinematic coupling system
The kinematic coupling system of the neXtG hotend ensures high rigidity of the heating block and noticeably minimises heat transfer to the heat sink.
The rigid structure performs some protective functions:
- Protects the heating block from bending if the bed levelling fails;
- Protects the heatbreak if the nozzle passes over an unsuccessful print.
Tip: The nozzle can be changed with one hand. Even if the nozzle is overtightened, the heatbreak is protected by the rigid structure of the system.
Compatibility with V6 nozzles
Like its predecessor, the XG-Hotend, the neXtG Hotend was equipped with the V6 nozzle system for more nozzle selection.
Same footprint as a Dragon Hotend
The neXtG has the same dimensions as the Dragon Hotend, which makes it compatible with the majority of Dragon hotend attachment systems (e.g. Voron, Creality etc.). With the groove mount adapter, it can also be used on Prusa printers (e.g. MK2, MK3, etc.).
Optimised ceramic heating
The neXtG Hotend uses an efficient ceramic heating plate, which is more cost-effective and easier to maintain compared to a ceramic ring heater.
Tip: The neXtG Hotend can be used immediately on Voron and Prusa 3D printers, it can also be adapted for Creality 3D printers. Special adapters are required for all other models.
