Are you looking to buy Polymaker PolyMide CoPA Nylon in Australia?
PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
We recommend that this material be used with the Sunlu Filament Dryer to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Product Features:
- Warp Free technology corresponding into near-zero warpage with excellent dimensional stability.
- Excellent toughness
- Excellent Heat Resistance with a high softening temp of 180 degrees.
- Wear Resistant
Print Settings
-
Nozzle Temperature: 250˚C – 270˚C
- Printing Speed: 30mm/s – 50mm/s
- Bed Temperature: 25˚C – 50˚C
- Bed Surface: Glass with glue
- Cooling Fan: OFF
PolyMide Specifications
- Young’s Modulus: 2223 ± 199 Mpa
- Tensile Strength: 66.2 ± 0.9 Mpa
- Bending Strength: 97.0 ± 1.1 Mpa
- Impact Strength: 9.6 ± 1.4 kJ/m2
- Glass Transition Temperature: 67˚C
- Vicat Softening Temperature: 180˚C
- Melting Temperature: 190˚C
Browse more
- Browse Polymaker
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse SLA Resin
- Browse Speciality Filament
- Browse TPU Filament