Sold Out

BetaFPV BEC Board for GoPro Hero 6/7 00313746_1

$18.95 AUD

IN STOCK ( left )

Add to Wishlist
SKU: 14718N/A W/H: N/A Barcode: N/A Shipping Weight: 70g N/A Categories: BetaFPV ,

We accept the following payment methods

Are you looking to buy BetaFPV BEC Board for GoPro Hero in Australia? 

BetaFPV BEC Board for GoPro Hero will fix all unwanted problems from not having solid amount of power or having a heavy sluggish GoPro. It integrated 5V@2A BEC, stock GoPro buttons and LED, pluggable connectors and remote recording

The BEC Board has been upgraded to the V1.1 version. With the new version, we don’t need to use 2 shims when assembling the BEC board on the GoPro motherboard, which can solve the problem that the two interfaces may loose when locked

This BEC board fits for GoPro Hero 6 and Hero 7 Black. But NOT for Hero 8.



  • Item: BEC Board for Naked Camera
  • Weight: 1.48g
  • Output: 5V@2A
  • Input Voltage: 2-4S
  • Connector: GH 1.25 3P Connector


Diagram of BEC Board

The two buttons on the BEC board has the same function as the stock GoPro buttons. Three actions we will use frequently. 


  • Power On - Press the Power/Mode button and the LED flashes three times and light off.
  • Start Record - Press the Record button once and LED flashes slowly. If LED flash once and light off, it means there is no SD card. 
  • Stop Record - Press the Record button and LED stop slow flashing.


LED Status 

Under normal operation, plug the GH1.25 connector into the GoPro Lite camera firstly, then connect with the battery. The LED will flash once, then you should press the Power / Mode button once in a second to power on. The LED on the BEC board has the same status as the stock LED on the GoPro mainboard.


Indication Button Operation LED Status
Power On Press the mode button once Flash 3 times and light off
Power Off Press the mode button for 5s Flash 7 times and light off
Start Record Press the record button once Continuously slow flash
Stop Record Press the record button once Flash 3 times and light off
Photo Function

Press the mode button and switch to photo function, then press the record button 

Flash once


How to Setup Remote Record

Pilot could use the switch on radio transmitter to start/stop record. Some more configuration needed.

We use the Pinio function in Betaflight to control record. First, setup the Pinio function of the B12 pin in the FC board.

resource FLASH_CS 1 NONE
resource PINIO 1 B12
set pinio_box = 40,255,255,255

Next, map one of the switch channels in your radio transmitter to this Pinio (aka USER1). As shown below, we map the AUX4 channel in the radio transmitter to USER1 Pinio. The cursor in the orange zone means button released and white zone means pressed. So keep the cursor in the orange zone in default.

Third, check if the Pinio function works. Change the switch and make the cursor move from the orange zone to the white zone, and finally back to the orange zone. Now you could check the LED status to know if the record starts. Use the same process to stop recording.

If you use the 12A F4 AIO FC board, like the 85X whoop drone, you will use the LED_STRIP pin (aka A08 pin pad) for the Pinio function.

resource LED_STRIP 1 NONE
resource PINIO 1 A08
set pinio_box = 40,255,255,255

Know more about the Betaflight Pinio function.


Whats included:

  • BEC Board for Naked Camera
  • H1.25 Power Cable (80mm 30AWG)


We know some of the pilots might have a question about how to get the case for the naked GoPro or some might wanna grab the GoPro Lite Camera directly. Here we provide some more choices for your better installation. You can also find the STL File for GoPro Lite Series here.

View all our related Gopro Lite products

    Click here to check the STL Files for GoPro Lite Series.




    Why Choose Phaser FPV?

    Here’s Why 1000s of Buyers Trust Us

    In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.

    Same-Day Ship

    If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.

    Transparent Stock

    We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.

    Highly Rated

    We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!

    Walk In Anytime

    Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.

    Fast Support

    We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.

    We’re on Social

    We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.

    It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.

    Not enough items available. Only [max] left.
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page