Voron 2.4 R2 Functional Parts Set Printed in ABS

Are you looking to buy a Voron 2.4 R2 Functional Parts set in Australia?

This is a full functional parts set designed to get your 2.4 kit up and running so you are able to print the nonfunctional parts needed to complete the kit.

All parts are printed in Polymaker ABS - Please let us know in your order comments what Colour Accent parts you would like. If you don't leave a comment, the standard accent colour is Red

View all our Voron 3D Printed Part Kits here.

What does Functional / Non Functional Parts Mean?

This relates to printed parts for 2.4 & Trident. 0.1 comes with all printed parts so its not applicable.

The functional parts give you all the parts required to do your first print, however some people have been underwhelmed after buying the functional parts and putting it together.

-Functional Parts will not give you an enclosed ready printer for printing ABS
-Functional Parts do not include any skirting or acrylic panel mounting.

The idea is that you could print these in PLA as they are external once you have your printer runing and then in other materials later once you have an enclosure.

You may decide that you would like to buy Functional & NON Functional parts before you start building your Kit if this does not sound ideal.

Toolhead: 

• printhead_front_*selected hotend*.stl
• printhead_rear_*selected hotend*.stl
• chain_anchor.stl
• chain_anchor_10x11chains.stl
• extruder_body.stl
• extruder_motor_plate.stl
• latch_shuttle.stl
• [a]_connector_cover.stl
• [a]_guidler.stl
• [a]_latch.stl

AB Drive Units:

• a_drive_frame_lower.stl
• a_drive_frame_upper.stl
• b_drive_frame_lower.stl
• b_drive_frame_upper.stl
• [a]_z_chain_retainer_bracket_x2.stl
• [a]_cable_cover.stl

X-Carriage:

• blower_housing_rear.stl
• hotend_fan_mount.stl
• probe_retainer_bracket.stl
• x_carriage_frame_left.stl
• x_carriage_frame_right.stl
• x_carriage_pivot_block.stl
• [a]_belt_clamp_x2.stl
• [a]_blower_housing_front.stl

Clips:

• a]_z_belt_clip_lower_x4.stl
• [a]_z_belt_clip_upper_x4.stl

Front Idlers:

• front_idler_left_lower.stl
• front_idler_left_upper.stl
• front_idler_right_lower.stl
• front_idler_right_upper.stl
• [a]_tensioner_left.stl
• [a]_tensioner_right.stl

Z-Joints:

• z_joint_lower_x4.stl
• z_joint_upper_x4.stl
• z_joint_upper_hall_effect.stl

XY-Joints:

• xy_joint_left_lower.stl
• xy_joint_left_upper.stl
• xy_joint_right_lower.stl
• xy_joint_right_upper.stl
• [a]_endstop_pod_hall_effect.stl
• [a]_endstop_pod_microswitch.stl
• [a]_xy_joint_cable_bridge_generic.stl
• [a]_xy_joint_cable_bridge_igus.stl

Z-Drive:

• z_drive_main_a_x2.stl
• z_drive_main_b_x2.stl
• z_drive_retainer_a_x2.stl
• z_drive_retainer_b_x2.stl
• z_motor_mount_a_x2.stl
• z_motor_mount_b_x2.stl
• z_chain_bottom_anchor.stl
• z_chain_guide.stl
• [a]_belt_tensioner_a_x2.stl
• [a]_belt_tensioner_b_x2.stl
• [a]_z_drive_baseplate_a_x2.stl
• [a]_z_drive_baseplate_b_x2.stl

Z-Idlers:

• z_tensioner_bracket_a_x2.stl
• z_tensioner_bracket_b_x2.stl
• [a]_z_tensioner_x4_9mm.stl

Miscellaneous:

• nozzle_probe.stl
• rail_installation_guide_center_x2.stl
• bowen_retainer.stl
• spool_holder.stl

Electronics Mounting:

• plug_panel_filtered_mains.stl

DIN Brackets:

• lrs_psu_bracket_clip.stl
• raspberrypi_bracket.stl
• rs25_psu_bracket_clip.stl
• pcb_din_clip_x3.stl

Selection for Hotend parts:

• E3D V6
• Slice Mosquito
• Triangle Labs dragon

Selection for MCU brackets:

• Duet Duex
• BTT SKR 1.3 / 1.4
• BTT Octopus
• Fysetc Spider

Browse more

• Browse all Voron Parts and Accessories
• Browse the Voron 2.4