FETtec FC G4 v1.7 IIM-42652 Flight Controller

FETtec FC G4 v1.7 IIM-42652 Flight Controller

$154.95 AUD
Skip to product information
FETtec FC G4 v1.7 IIM-42652 Flight Controller
  • FETtec FC G4 v1.7 IIM-42652 Flight Controller
  • FETtec FC G4 v1.7 IIM-42652 Flight Controller
  • FETtec FC G4 v1.7 IIM-42652 Flight Controller
  • FETtec FC G4 v1.7 IIM-42652 Flight Controller
  • FETtec FC G4 v1.7 IIM-42652 Flight Controller
FETtec FC G4 v1.7 IIM-42652 Flight Controller

FETtec FC G4 v1.7 IIM-42652 Flight Controller

$154.95 AUD
GST included Shipping calculated at checkout.

Delivery options

FETtec FC G4 v1.7 IIM-42652 Flight Controller

Pickup

Local pickup is free. Collect from Somersby NSW; choose Pick up at checkout instead of a courier. We open 7:30am Monday - weekend orders are usually ready to collect by 10am.

Delivery options
Out of stock
Price match

Request a price match

FETtec FC G4 v1.7 IIM-42652 Flight Controller Our price: $154.95

We reply approved or declined by email, usually within 15–60 minutes during business hours. Matching is at our discretion — we can't promise every price, but if it's fair we usually will.
Order in H, M, Seconds (before 1pm Sydney time) for same day despatch.
Fast dispatch from Somersby, NSW Easy returns Australian warranty & local support

Pickup availability

1/80 Somersby falls RD, Somersby NSW
Unavailable for pickup
Product details
SKU: 24914
Barcode: 4260740040032
Shipping Weight: 20g
W/H: U-02-G-01
Categories: 20x20 Flight Controller, 30x30 Flight Controller, Fettec, Flight Controllers, IIM-42652 Gyro FPV Flight Controllers
Tags: 20x20 Flight Controllers, 30x30 Flight Controllers, IIM-42652, Kiss


Are you looking to buy a FETtec FC G4 v1.7 Flight Controller in Australia?

Product information "FETtec FC G4 v1.7"

Characteristics:

  • Latest STM32G473 processor

    • 180Mhz + Math accelerator
    • Gyro IIM-42652 SPI

  • Designed for 6-27V supply voltage (2S-6S Lipo)

  • 2x onboard BEC (2A each)

    • 5V BEC for RX
    • 5V/16V BEC for VTX (configurable and real Pit*)

  • Improved IO protection

    • All IOs of the microcontroller, eg in connectors or solder pads, are protected against voltage or current peaks

  • 2x 8 pin connector for solderless ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND
    • Connector 2: ESC signal 5-8 (depending on the selected UAV type 1-4), telemetry, VCC, GND

  • 1x 8 pin connector for solderless connection to VTX, camera and OSD of the digital systems

    • real Pit* VCC, GND, video in, video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connector for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND
    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free
    • UART 2 occupied by receiver
    • UART 3 free
    • UART 4 ​​occupied by OSD, can be used elsewhere depending on configuration
    • UART 5 occupied by ESCs / TLM / Onewire

  • 4 ESC solder pads (Signal/GND) on each corner

  • Buzz pads

  • 4 tiny RGB LEDs (color selectable)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

  • Updated onboard OSD

    • Graphic OSD (STM32)
    • Full KISS tuning
      • Filters (PIDs, Rates, Settings)
      • LED settings (RGB LED, Racewire)
      • VTX
      • Live data graphics (voltage, engine speed, current, engine temperature, gyro values, reception quality)
      • KISS GPS support + Live Map
      • Custom graphic pilot logo
      • Stick Overlay
      • Custom layout

  • Connector type: JST-SH-1mm

 

*real pit mode: switchable supply pad

 

Dimensions:

dimensionsO2BNL0T723GCJ

  • Maximum external dimensions: 37.2 x 37.2mm, without fastening straps 30 x 30mm

  • Arrangement of the mounting holes:

    • 20 x 20mm with M2 mounting holes (upgradable to M3)
    • 30 x 30mm with M3 mounting holes
    • 30 x 30mm mounting hole tabs are removable to reduce the overall size of the FC

  • Height: 7.9mm

  • Weight: 5.37g

 

Firmware:

  • FETtec Alpha FC firmware (KISS FC firmware flashable)

  • FETtec OSD firmware 

Includes:

  • 1x FETtec FC G4 v1.7
  • 1x open 8 pin cable (JST connector on one side)
  • 1x open 6 pin cable (JST connector on one side)
  • 1x open 4 pin cable (JST connector on one side)
Available downloads:

Browse more

You may also like