Polymaker Panchroma Regular Polyester Based 1.75mm Filament 1kg

Are you looking to buy Polymaker Panchroma Regular Polyester Based 1.75mm Filament 1kg in Australia?

Panchroma™ Regular (from Polymaker) is a new product in the Panchroma family, based on a new innovative polyester-based formula, developed to improve printability (bridging, overhang), widen the printing temperature window and increase the printing speed up to 400mm/s. Panchroma™ Regular formula was developed to print with PLA-like settings.

Your Filament Palette! Panchroma is a newly introduced product family from Polymaker dedicated to offering an unparalleled spectrum of colors, surface finishes, and unique aesthetic effects. Panchroma filaments are meticulously engineered for exceptional printability, Click here to learn more about Panchroma product range.

DO NOT use with Textured PEI without first reading "Specifications & FAQ" tab. For multi-colour or dual extrusion printing, please note Panchroma (Polyester-based) will not stick to Panchroma / Polymaker PLA-based products or other brands of PLA-based filaments.

Features

• Formulated for High Speed - Panchroma Regular (Polyester-based) has been developed to print with exceptional quality on compatible high speed 3D printers. Tested up to 32mm³/s at 230˚C.
• Excellent Surface Finish - Built from the ground-up for 3D printing, Panchroma Regular (Polyester-based) delivers a smooth surface finish with a satin-like effect. Combined with a wide range of colours, Panchroma Regular (Polyester-based) delivers high quality 3D prints with an attractive surface finish.
• PLA Printing Settings - Panchroma Regular (Polyester-based) has been developed to print with very similar settings to PLA and offering compatibility with a wide range of 3D printers including some models from Bambulab, Creality, Elegoo, FlashForge, Anycubic, VORON, Prusa Research, Raise3D and other popular extrusion based 3D printers. Panchroma Regular (Polyester-based) can be printed without a heated bed and with some surfaces may work best with lower bed temps. Please see notes regarding textured PEI.
• Affordable & Low Cost - Panchroma Regular (Polyester-based) has been developed as a low-cost and affordable material that maintains high quality, diameter and colour consistency. Polymakers innovative R&D technologies, compounding and extrusion systems ensure consistent reliability between batches so you can print affordably without sacrificing quality.

Printing Settings

• Nozzle Temperature: 190°C - 220°C
• Build Plate Temperature: 40°C - 60°C *Depends on build-surface material.
• Build Plate: 
• Smooth PEI - Will stick slightly more than regular PLA. If reducing adhesion use lower temperature (40-50°C). If improving adhesion, you can apply PVA glue stick to the build surface.
• Textured PEI (Experimental)* - DO NOT use a build surface treatment. Use less than 40°C build plate temperature. Remove once buildplate has cooled. Note there are reports that intricate first layers can stick too well to textured PEI. *We list textured PEI as experimental based on some initial reports in the US. We would rather be overly cautious in the advice we provide customers.
• Cooling Fan: ON
• Printing Speed: Up to 400mm/s

The above are printing recommendations based on 0.4 mm nozzle. Please note ideal printing conditions may vary depending on your 3D printer setup. For high speed 3D printers, make sure to increase your extrusion temperature in order to use higher printing speeds.

Specifications

• Net Weight: 1kg
• Material Type: PLA (with Saturated/Backlight reactive colour pigments)
• Density: 1.19 (g/cm3)

Browse more

• Browse Carbon Fibre Filament
• Browse Polymaker
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse SLA Resin
• Browse Speciality Filament
• Browse TPU Filament