Bambu Lab H2C Induction Hotend (Right)

$59.95 AUD

GST includedShipping calculated at checkout.

1 In stock

Order in H, M, Seconds (before 1pm Sydney time) for same day despatch.

Type Standard High Flow

Size 0.2mm Stainless Steel 0.4mm Hardened Steel 0.6mm Hardened Steel 0.8mm Hardened Steel

Stock status Stock status

Stock status
Type	0.2mm Stainless Steel	0.4mm Hardened Steel	0.6mm Hardened Steel	0.8mm Hardened Steel
Standard
High Flow

Pickup available

1/80 Somersby falls RD, Somersby NSW

Usually ready in 2 hours

SKU: FAH051

Barcode: 6937285509055

Shipping Weight: 65g

W/H: V-04-E-10

Categories: 3D Printer Hotends, 3D Printer Nozzles, Bambu Lab, Bambu Lab H2 Series

Tags: Hotend, Nozzle, restocked

Add to Wishlist

Why buy from Phaser FPV?

Dependable — Phaser started in 2012. Long reputable history and 5 star reviews.
Speed — All stock is in our retail store in Somersby NSW Australia. We ship express today; you often receive tomorrow. Shipping details.
Transparent stock — If it says in stock, we ship today. If we know the ETA, we show it on the product.
Experience — Across our staff you'll find people who fly, build, and use this gear. Not sure what to buy? Call us — we'll help you avoid buying twice.
Free gift on first and recurring orders
Active on social media — tag us or DM us
Large Facebook community for like-minded pilots
GST registered — handy if you need to claim GST (some niche FPV stores are not)

Are you looking to buy Bambu Lab H2C Induction Hotend (Right) in Australia?

Multi-Material Printing with Less Waste

The Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend swap mechanism eliminates purge flushing during filament changes (H2C under 7 filaments), saving both material and time.

Compatibility

H2 Series

Fast and Precise Induction Heating

The Vortek Induction Hotend rapidly heats the nozzle to printing temperature in approximately 8 seconds (PLA). This fast response shortens colour-change transitions and further reduces purge waste. Integrated overheat, overvoltage, short-circuit, and open-circuit protection ensure reliable performance during continuous multi-material workflows.

Reliable Contactless Connection

Instead of contact-based metal pins; which can oxidise and degrade over time, the Vortek System employs a contactless, high-frequency power and signal interface. This delivers a stable, long-lasting connection for accurate temperature control and synchronized hotend operation.

Heatsink Overheat Monitoring

Dual temperature sensors monitor both nozzle and heatsink temperatures in real time. When heatsink temperature exceeds safe limits, the system automatically increases cooling to prevent heat creep and reduce the risk of clogging.

Intelligent Multi-Hotend Management

Each Vortek Hotend stores its filament information locally, ensuring correct material mapping and preventing loading errors. When printing with more than seven filament types, the system intelligently optimises hotend mapping to minimise purge waste and improve overall efficiency.

Real High-Flow, Real Time Saved

Induction Stainless Steel Nozzle (0.2mm): 2 mm³/s
Induction Hardened Steel Nozzle (0.4mm): 25 mm³/s
Induction Hardened Steel Nozzle (0.6mm): 30 mm³/s
Induction Hardened Steel Nozzle (0.8mm): 30 mm³/s
High Flow Induction Hardened Steel Nozzle (0.4mm): 40 mm³/s
High Flow Induction Hardened Steel Nozzle (0.6mm): 40 mm³/s
High Flow Induction Hardened Steel Nozzle (0.8mm): 40 mm³/s

*Tested with Bambu PLA Basic.

Filament Compatibility

Learn more about filament compatibility on Bambu Lab Wiki.

If you print only single-colour filament, we recommend using the Fixed Hotend (Induction Hotend) for printing.
If you need multi-colour printing with the AMS, connect the AMS to the right-side Fixed Hotend.
If you want to use the second hotend for support-material printing, we recommend using the Liftable Hotend.
TPU85A is only supported on the right-side Fixed Hotend. TPU95AHF/90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.
PET-CF / PPA-CF / PPS-CF are supported only on the left-side Liftable Hotend.
CF/GF-reinforced filaments are not compatible with stainless steel nozzles.